Buoyancy Impex - Urea, Sugar, Cement, Bitumen, Paraffin Oil, Iodine & its derivatives, Chemicals, Yarns, P.E.T products, PVC Resins, Manufacturers, Suppliers, Exporters

FUEL OIL / MAZUT M100 (GOST 10585/ -75/99)

BRIEF INTRODUCTION

Buoyancy Impex Pvt Ltd , India offers FUEL OIL/ MAZUT M100 (GOST 10585/75 & FUEL OIL/ MAZUT M100 (GOST 10585/99 with Russian Origin & have a capability of offering it, ranging from 50,000MT /Month Minimum and Maximum as per customer's request on yearly contract basis, by Bulk shipment in chartered shipments to your destination port. Spot shipments are available on request with a minimum size of 50000 MT. Forms of payments are flexible, depending upon the request of customers.

We are very serious when it comes to supply of Commodities and accept to work with serious buyers that provide correct documentation, we do not facilitate long chain of brokers or speculators between the buyers and sellers or believe in offering kickbacks or marking up of price.

Detailed Product Description :

Product : MAZUT M100 (GOST 10585/75 / M100 (GOST 10585/99))
Quality Spec: GAS OIL L-0,2-82 ( GOST 305-82)
Supply Ability : Minimum 50000 MT per Month
Origin : Russia
Packing : Bulk shipment
UNIT 1 MT = 7.4 BARRELS
Every shipment is insured against contamination and loss.
Contract Length : Not exceeding 12
Price : USD/MT Gross-Net basis CIF ASWP
Payment Types: Irrevocable, Confirmed, Transferable /Non–Transferable, Unconditional, Divisible, Auto Revolving FFRDLC /RDLC/ DLC/SBLC/ BG, Payable 100 % at sight against shipped quantity.
Inspections : By SGS(Societe General de Surveillance ) Or Another compatible World class inspection organization at port of loading, confirming that the commodity meets the specifications supplied at loading port at sellers cost for quality , quantity photos of the product
PB : Not more then 2% of each shipment value
We do not offer samples, past performances, Bill of lading or allocation letters. Genuine Buyers may only contact us.

HEAVY FUEL OIL / MAZUT M100 GOST 10585/75

1. Ash content, not more %	0,14
2. Mass fraction of sulphur, not more % - low – sulphur – residual – oil	0,5
3. Temperature of the flash, not less ºC in the closed crucible
In the open crucible ºC	110 min
4. The temperature of solidification, not higher ºC	25
5. Kinematics viscosity	118 max
6. Water content	0.5%
7. Mechanical impurities	Lower than 0.1%
8. Acidity	Lower than 5 mg KOH/ 100ml
9. Alkalinity	nil
10. Gross Calorific Value Kcal/kg / KJ/kg	Min9700/41300
11. Density at 20.0 deg. C Kg/l	0.8500-0.9200
12. Hydrogen Sulfide Content (H2S) pom	0.5 max
13. Carbon Residua	Lower than 7%
14. Vanadium (V) ppm	23
15. Aluminum (Al) ppm	5
16. Silicon (Si) ppm	12
17. Nickel (Ni) ppm	29
18. Aspartames m/m	3.6%
19. Distillation @4 mm Hg
Extracted to 760 mm Hg
Initial Boiling Point deg. C	216
5% recovered deg. C	259
10% recovered deg. C	310
20% recovered deg. C	358
30% recovered deg. C	445
40% recovered deg. C	502
50% recovered deg. C	534
60% recovered deg. C	538
75% recovered deg. C	545
80% recovered deg. C	-
95% recovered deg. C	550
Final Boiling point deg. C	560
Percent Recovered vol	78%
Residue vol	22%
Total Nitrogen m/m	0.192%
20. Sodium (Na) ppm	15

FUEL OIL MAZUT M100 (GOST 10585/99)

COMPONENT	RESULT
1. ASH CONTENT, NOT MORE%	0,14
2. MASS FRACTION OF SUOPHUR, NOT MORE % - LOW – SULPHUR – RESIDUAL - OIL	1,5-
3. TEMPERATURE OF THE FLASH, NOT LESS ºC IN THE CLOSED CRUCIBLE
IN THE OPEN CRUCIBLE ºC	110 MIN
4. THE TEMPERATURE OF SOLIDIFICATION, NOT HIGHER ºC	25
5. KINEMATICS VISCOSITY	118 MAX
6. WATER CONTENT	1%
7. MECHANICAL IMPURITIES – LOWER THAN	1%
8. ACIDITY – LOWER THAN	5 MG KOH / 100 ML
9. ALKALINITY	NIL
10. GROSS CALORIFIC VALUE KCAL / KG / KJ / KG	MIN 9200 / 41300
11. DENSITY AT 15.0 DEG. C KG/L	0,8900 – 0.9200
12. HYDROGEN SULFIDE CONTENT (H2S) PPM	0,5 MAX
13. CARBON RESIDUAL	LOWER THAN 7%
14. VANADIUM (V) PPM	123
15. ALUMINUM (AL) PPM	5
16. SILICON (SI) PPM	12
17. NICKEL (NI) PPM	49
18. ASPHALTENES M / M	3,6%
19. DISTILLATION @ 4 MM HG
EXTRACTED TO 760 MM HG
INITIAL BOILING POIT DEG. C	216
5% RECOFERED DEG. C	259
10% RECOFERED DEG. C	310
20% RECOFERED DEG. C	358
30% RECOFERED DEG. C	445
40% RECOFERED DEG. C	502
50% RECOFERED DEG. C	534
60% RECOFERED DEG. C	538
75% RECOFERED DEG. C	545
80% RECOFERED DEG. C	-
90% RECOFERED DEG. C	-
FINAL BOILING POINT DEG. C	550
PERCENT RECOVERED VOL .	78%
RESIDUE VOL .	22%
TOTAL NITROGEN M / M	0,192%
20. SODIUM (NA) PPM	15

Standard Procedures :

Buyer issues an Irrevocable Corporate Purchase Order with banking information, granting permission to Seller to conduct Soft-probe and subject to Seller’s acceptance of the order.
Seller signs the MFPA for the Commission to be paid by Seller’s Bank to Pay Masters.
Seller will confirm the POP allocation quantity and insert to the Draft Contract and
send to the Buyer.
Buyer fills in the buyer information in the Contract and sign, return to Seller.
Seller will insert the actual POP allocated quantity, Contract Number etc into the MFPA and the Seller must arrange Seller’s Bank to endorse the MFPA and issue a confirmation letter to all parties detailed in the MFPA. This procedure is only arranged upon Seller’s receipt of L/C from the Buyer.
Buyer bank officer and Seller bank officer to discuss and agree on the text for the RDLC
Buyer and Seller will discuss the SPA arrangement via bank to bank.
Buyer’s Bank issues RWA confirming that Buyer is ready, willing and able to issue the RDLC upon receipt of Seller’s POP documents
Buyer’s Bank issues 100% Pre- advise Irrevocable, Transferable, Divisible, Unconditional,
Auto- Revolving DLC
Seller’s Bank issues 2% PB to the Buyer’s bank for product price.
RDLC becomes Operative upon receipt of Seller’s 2% PB
Shipment commence as per Contract

DRAFT DOCUMENTS :

LOI (Letter Of Intent) to be completely filled out on Buyers Letter Head

Draft LOI can be downloaded here!

BCL ( Bank Capability Letter ) to be completed by the Buyers Bank Official

Draft BCL can be downloaded here!